Elettrolinux

• ME-1000 series boards: ME-1000/64 64 TTL digital I/O channels (2x32 bit ports), ME-1000/128 128 TTL digital I/O channels (4x32 bit ports). Each port programmable as input/output. Port configured as output with readback function;
• ME-1600 series boards:12 bit output board with current/voltage channels ME-1600 12 bit D/A conversion, 4, 8, 12 or 16 voltage outputs or 16 voltage outputs, 8 of them also working as current outputs;
• ME-6x00 series boards:4, 8, PCI also 16 voltage outputs. Range ±10 V (max. ±15 mA per channel). ME-6200 and ME-6300: 1 additional channel 0?50 V. All channels opto-isolated, available as full opto-isolation with no common ground. All individual channels opto-isolated from the PC and from each other.

Meilhaus delivers loadable Linux kernel driver and library modules available from the Meilhaus web site. For this the source code of the driver module and the needed makefiles are available. The user then can compile a perfectly matching version for his GNU/Linux installation. Model ME-4680IS has been tested and used in the project Fsc2 but requires that the kernel driver and library, available from the Meilhaus web site has been installed. For more information about product overviews, charts and software/driver click here. NOTE: support for Meilhaus' boards are actively developed in the current version of the Linux kernel. Models currently supported/developed are ME-2000, ME-2600, ME-4650, ME-4660 and so on. This driver are on the path linux-<version 2.6.xx.yy>/drivers/staging/comedi/drivers/ added to the staging/ directory which means they're not just experimental, but also totally unstable and not suited at all for users.